Pet Blow Molding Machine is fabricated by using the premium grade materials under guidance of our skilled professionals who ensure its flawless construction by keeping each aspect in mind. It is widely utilized for the production of high quality PET bottles. It is highly time and energy efficient. Its simpler model designing allows easy installation and demands minimum maintenance. Pet Blow Molding Machine is highly resistant to corrosion and serves a durable life span. This product is available for customization in various ranges as per requirements at cost efficient rates.
Specification :
Equipment Range | BT- 2/1 | BT- 1/2 | BT -2/2 | BT -5/2 | BT -1/4 | BT-2/4 | BT-0.3/4 | BT- 0.5/6 | BT -20/1 |
Streching Mechanisum | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic |
Mechanical Output (BPH) * | 1500 | 2400 | 2800 | 1600 | 4400 | 5600 | 4800 | 6400 | 240 |
Mechanical Output (BPM) | 25 | 40 | 47 | 27 | 73 | 93 | 80 | 107 | 4 |
Market Segments | Water | Water | Water | Water | Water | Water | Pharma | Pharma | Water |
| CSD | CSD | CSD | Edible Oil | CSD | CSD | Liquor | Liquor |
|
| Edible Oil | Edible Oil | Edible Oil |
| Edible Oil | Edible Oil | CSD | CSD |
|
| Liquor | Liquor | Liquor |
| Liquor | Liquor | Water | Water |
|
| Fruit Drinks | Fruit Drinks | Fruit Drinks |
| Fruit Drinks | Fruit Drinks | Juice | Juice |
|
| Pharma |
|
|
|
|
|
|
|
|
| Jar |
|
|
|
|
|
|
|
|
Machine Details | BT- 2/1 | BT- 1/2 | BT -2/2 | BT -5/2 | BT -1/4 | BT-2/4 | BT-0.3/4 | BT- 0.5/6 | BT -20/1 |
No. of cavities | 1 | 2 | 2 | 2 | 4 | 4 | 4 | 6 | 1 |
Max. volume of bottle | 2 Lit. | 1 Lit. | 2 Lit. | 5 Lit. | 1 Lit. | 2 Lit. | 330ml | 500ml | 20 lit |
Min. volume of bottle | 100ml | 30ml | 200ml | 500 ml | 30ml | 200ml | 30ml | 30ml | na |
Max. dia. of bottle (mm) | 120mm | 82 | 105 | 170 | 82 | 105 | 60 | 60 | 300 |
Max. height (mm) | 340 | 285 | 355 | 355 | 285 | 355 | 220 | 220 | 420 |
Neck ID Min - Max (mm) | 28 - 46and 80 | 16 - 46 | 16 - 38 | 28 - 63 | 16-30 | 25-30 | 16 - 30 | 16 - 30 | 80 |
Type of Stretching | Pneu | Pneu | Pneu | Pneu | Pneu | Pneu | Pneu | Pneu | Pneu |
Type of Locking | Pneu WL | Pneu WL | Pneu WL | Pneu WL | Pneu WL | Pneu WL | Pneu WL | Pneu WL | Pneu WL |
Mechanical Speed | 1400 | 2400 | 2400 | 1600 | 4400 | 5200 | 4400 | 4400 | 240 |
Max. Production Speed (bph) | 1400 | 2400 | 2200 | 1600 | 4000 | 5000 | 3600 | 3600 | 200 |
No. of Heater Banks | 3 | 3 | 3 | 4 | 4 | 5 | 3 | 6 | 5 |
No. of Heating Zones | 9 | 7 | 9 | 9 | 8 | 9 | 6 | 6 | 12 |
Connected Load KW (Heating) 1500 kw one IR lamp | 40.5 | 31.5 | 40.5 | 54 | 48 | 67.5 | 27 | 54 | 90 |
Total connected load(kw) | 26 | 38 | 61 | 82 | 103 | 114 | 30 | 64 | 96 |
chiller requirement LPM | 30 lpm | 30 lpm | 50 lpm | 50 lpm | 50 lpm | 80 lpm | 50 lpm | 50 lpm | 50 lpm |
Compressor requirement for high pressure is consider as per maximum pack size | 50 | 84 | 170 | 200 | 150 | 371 | 57 | 130 | 166 |
Compressor requirement for low pressure @8 bar for 1l water mold in cfm | 50 | 70 | 70 | 90 | 90 | 90 | 68 | 150 | 90 |
with air recovery system for 1l water mold in cfm | 30 | 38 | 38 | 35 | 30 | 30 | na | na | 30 |
Service provider for all blow molding machine :- (mainly Side Synergy all types of machines)
Retrofit option
![]() |
SAP BLOWTEK MACHINERY
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd.(Terms of Use) Developed and Managed by Infocom Network Ltd. |